The Affect-tag band doesn't appear on the pairing screen.

• Related Articles

• An Affect-tag band appears on the pairing screen but it is not on.

  The band was detected while the application was in pairing mode. If not using the band during the following session, only pair the bands that will be used and launch the session. If the band will be used during the next session, restart the ...

• The blue LED on the Affect-tag band blinks rapidly while on the pairing screen.

  The last session was not finished properly and the band is clearing the storage to make space for the next session. Wait for the band to stop blinking and then pair the band with the mobile application.

• The Affect-tag band turned off during a session or during the data recovery phase.

  The data is lost. Before the next session: Ensure there is enough battery on both the mobile device and the Affect-tag band Restart the application by double clicking the home button and swiping upwards. Restart the band by pressing simultaneously on ...

• The Affect-tag band doesn't turn on or vibrates for 2 seconds and then turns off.

  Charge the band for a minimum of 30 minutes and then press simultaneously on the 2 buttons to turn it on. The band is on if it vibrates 3 times upon starting and the blue LED blinks 1 per second.

• The mobile application closes during a session before the data recovery phase.

  The data is lost. Before the next session: Ensure there is enough battery on both the mobile device and the Affect-tag band Restart the application by double clicking the home button and swiping upwards. Restart the band by pressing simultaneously on ...